04-06 SPRINTER VAN ABS BRAKE ANTI-LOCK CONTROL MODULE 0 265 950 151 TESTED
Product Description
Part Number
- 0 265 950 151 - You must match this!
- EBCM is free and clear of rust or corrosion. Please secure tightly.
Fitment
- You must match your part number exactly for proper fitment. If you do not match this you more than likely will get a no communication situation.
- EBCM will require initialization to your vehicle
- Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes. You must also test and verify your abs pump is good. If you install a new module onto a bad pump it will pop the module.
Tech Notes
- Module has been tested by our experienced technical staff!
Install Notes
- Please follow below for proper installation of module:
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- After install clear Diagnostic Trouble Codes and have the module programmed to the vehicle with a proper scan tool.
Warranty
This EBCM carries a 3 Month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.