Cart 0
00-04 FORD F-150 F-250 EBCM ABS ANTI-LOCK BRAKE MODULE 1L34-2C346-AA šŸ’„REMANšŸ’„
00-04 FORD F-150 F-250 EBCM ABS ANTI-LOCK BRAKE MODULE 1L34-2C346-AA šŸ’„REMANšŸ’„
00-04 FORD F-150 F-250 EBCM ABS ANTI-LOCK BRAKE MODULE 1L34-2C346-AA šŸ’„REMANšŸ’„
00-04 FORD F-150 F-250 EBCM ABS ANTI-LOCK BRAKE MODULE 1L34-2C346-AA šŸ’„REMANšŸ’„

00-04 FORD F-150 F-250 EBCM ABS ANTI-LOCK BRAKE MODULE 1L34-2C346-AA šŸ’„REMANšŸ’„

Product Description

Part Number

1L34-2C346-AA < You must match this!

EBCM is free and clear of rust or corrosion.

Fitment

    You must match your part number all the way through the software code (two letters at end of part number) for proper fitment. If you do not match this you more than likely will get a no communication situation.
  • EBCMĀ may require initialization to your vehicleĀ 
  • Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of theseĀ situations can set trouble codes.Ā 

Tech Notes

    ModuleĀ has beenĀ repaired and tested by ourĀ experienced technical staff! Some of those testsĀ are listed below:Ā 
  • Solder joints that typically fail have been repairedĀ 
  • 12+ internal components tested and repaired as necessaryĀ 
  • Relay which typically fails has been replacedĀ Ā 
  • ****NOTE: One mounting point is missing but the other three should hold this module in tight. If necessary you may want to use a large zip tie but we do not think that will be necessary.

Install Notes

    Please follow below for proper installation of module:Ā 
  • Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.Ā 
  • Disconnect and remove module to be replaced. Make sureĀ connector harness is clean and there are no broken wires.Ā Ā 
  • Install and connectĀ the replacement module.Ā Ā 
  • Connect the negative terminal of the battery.Ā 
  • After install clear Diagnostic Trouble Codes and drive vehicle for 1 to 2 days. This will allow your vehicle's monitoring system to reset.Ā 
  • Clear codes again and no codes should reappear. Ā Ā 

Optional Core Refund

    If you would like to send your ABS module back to us for a $20 refund, please let us in the "Notes to Seller" box and we will include a prepaid return label with your order. It's that simple! Again, this is optional and you are not obligated to send your ABS module back to us.
  • We will not be able to issueĀ a core refund for units that have been completely destroyed by rust.

Warranty

  • This EBCM carries aĀ 6 MonthĀ warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.