98-02 MERCEDES ML320 ML430 BS ANTI-LOCK BRAKE CONTROL PUMP MODULE MCU 4-ESP
Module: MCU 4-ESP - You must match this. It will be on your abs module
- You must match your part number all the way through for proper fitment. If you do not match this you more than likely will get a no communication situation.
- EBCM and pump combo may require initialization to your vehicle
- Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes.
- Please follow below for proper installation of module:
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove pump/module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement pump/module.
- Connect the negative terminal of the battery.
- Module/Pump may require programming to your vehicle before it will work properly.
- This EBCM and pump combo carries a 3 Month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.