2015 RAM 1500 3.0L DIESEL ECU ECM PCM ENGINE COMPUTER 68285587 TESTED
Product Description
Part Number
68285587AH
ECU requires programming before installation.
We offer FREE programming, see details below!
Fitment/Interchange
This ecu will interchange or replace the following part numbers:
68285587AA
68285587AB
68285587AC
68285587AD
68285587AE
68285587AF
68285587AG
68285587AH
P68285587AH
R8285587AH
68285587
Tech Notes
- ECU has been tested with our state of the art vehicle simulator which tests over many circuits in the ECU! Some of those are listed below:
- All traces good or repaired as necessary
- No circuit board dead spots from moisture intrusion
- No broken or corroded pins
Install Notes
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove the module to be replaced.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- See "Programming" below for additional install instructions.
Programming
For Plug and Play you must follow the below three steps:
Step 1: Match your part number series per above fitment guide
Step 2: Program ecu to your VIN. You will need your local mechanic, Ram dealer or properly equipped locksmith to program your VIN into the ecu. Without this you will get a "no start" condition.
Item Condition
- Mounting points are all open and intact
- Pins perfect, none are broken or bent
- There may be some minor chipped plastic on connector but lock tabs are place
Warranty
This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.