16-18 GRAND CHEROKEE 3.6L ECU ECM PCM ENGINE CONTROL COMPUTER 68370410 TESTED

68370410

PCM requires programming before installation.

This PCM will interchange or replace the following part numbers:

68370410AD

68370410AE

68370410AF

68370410AG

68370410AH

68370410AI

68370410AJ

68370410AK

68370410AL

68370410AM

68370410AN

68370410AO

68370410AP

68370410AQ

PCM has been tested with our state of the art vehicle simulator which tests over 25 circuits of the PCM! Some of those are listed below:
• Reference Voltage Good!
• PCM powered up and has communication!
• Starter, ASD and SCR relay circuits test good!
• Vaccum, DEF and Fuel Pump circuits test good!
• PCM injectors and A/C clutch test good!

• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove the module to be replaced.
• Install and connect the replacement module.
• Connect the negative terminal of the battery.
• See "Programming" below for additional install instructions. 

For Plug and Play you must do the following steps:

Step 1: Match your part number per above fitment/interchange notes

Step 2: Program PCM to your VIN. You will need your local mechanic, dealer or properly equipped locksmith to program your VIN into the PCM and apply any necessary updates. Without doing this you will get a "no start" condition.

• Mounting points are all open and intact
• Pins perfect, none are broken or bent
• There may be some minor chipped plastic on connector but lock tabs are place

This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.

If you would like to return your core for a $10 partial refund let us know during checkout through the "notes to seller" and we will send a prepaid return label with your order. It's that simple. Once your original item comes in we will process your refund promptly.