05-08 CHEVROLET CORVETTE EBCM ABS ANTI-LOCK BRAKE MODULE 25847889 25847891 REMAN
Product Description
Part Number
- 25847889 and 25847891 - You must match both of these!
- EBCM is free and clear of rust or corrosion.
Fitment
You must match your part number for proper fitment. If you do not match this you more than likely will get a no communication situation.
- EBCM may require initialization to your vehicle
- Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes.
Tech Notes
- Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below:
- Solder joints that typically fail have been repaired
- Relay which may fail has been tested and replaced if necessary
Install Notes
- Please follow below for proper installation of module:
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- After install clear Diagnostic Trouble Codes and drive vehicle for 10-20 miles. This will allow your vehicle's monitoring system to reset.
- Clear codes again and no codes should reappear.
Warranty
This EBCM carries a 3 Month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.