05-07 F-250 SUPER DUTY ABS ANTI-LOCK BRAKE CONTROL MODULE 5C34-2C346-AH TESTED

5C34-2C346-AH - YOU MUST MATCH THIS! (Note: This listing is for the module only.
• EBCM will require programming to your vehicle. Your mechanic will need to use the trucks as built data to program/calibrate the module to the vehicle. These are not plug and play.

EBCM will replace the following part numbers on 2005-2007 Ford Super Duty trucks:

5C34-2C346-AH

• Module will require programming to your vehicle. See above.
• Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes. 

Module has been tested: Board has been removed from the case and all transistors tested, trace repairs made if necessary and no corrosion verified. All solenoids in place and undamaged.

Please follow below for proper installation of module.
• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires. 
• Install and connect the replacement module. 
• Connect the negative terminal of the battery.
• Have module programmed to your vehicle by your mechanic per above notes. Have him also clear or reset all monitors.

This module carries a 3 month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.