04-06 YUKON TAHOE ABS ANTI-LOCK BRAKE CONTROL MODULE 13642514 CHIPPED CONNECTOR
Product Description
Part Number
- 13642514R WITH PIN SET UP 40-6 Plus center connector completely different than standard GM abs modules.
- EBCM is free and clear of rust - see pictures.
- NOTE: The large connector is chipped and three lock tabs are missing - see pictures. We believe if you install carefully you will be good to go, but we are including a large zip tie for you to make sure the connector stays in place. Be sure you are comfortable with this before purchasing.
Tech Notes
- Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below:
- Solder joints that typically fail have been repaired
- 12+ internal components tested and repaired as necessary
- Relay which typically fails has been replaced
- ***NOTE: The large connector is chipped and three lock tabs are missing - see pictures. We believe if you install carefully you will be good to go, but we are including a large zip tie for you to make sure the connector stays in place. Be sure you are comfortable with this before purchasing.
- ***NOTE: The bottom gasket is not included. Be prepared to reuse the gasket from your original module if necessary.***
- Mounting points are good
Install Notes
- Please follow below for proper installation of module. If you don't follow these steps you can surge the unit and kill the board. If this happens, we cannot take a return as we repair, power and communicate with all of these units.
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- After install clear Diagnostic Trouble Codes and drive vehicle for 10-15 miles.
- Clear codes again and no codes should reappear.
Optional Core Refund
- If you would like to send your ABS module back to us for a $20 refund, please let us in the "Notes to Seller" box and we will include a prepaid return label with your order. It's that simple! Again, this is optional and you are not obligated to send your ABS module back to us.
- We will not be able to issue a core refund for units that have been completely destroyed by rust.
Warranty
This EBCM carries a 6 month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.