2001 01 DODGE DURANGO REAR ABS ANTI-LOCK BRAKE CONTROL MODULE 52009896AF TESTED

  • $44.99
    Unit price per 


Product Description

Part Number

52009896AF - You must match this number exactly!

  • Module is free and clear of rust or corrosion.
  • ***NOTE: One mounting point is chipped - see pictures. Once installed you will not have any issues but we did want to point this out.

Fitment

You must match your part number all the way through the software code (two letters at end of part number) for proper fitment. If you do not match this you more than likely will get a no communication situation.

  • Module may require initialization to your vehicle
  • Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes.

Tech Notes

    Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below:
  • Solder joints that typically fail have been repaired
  • Internal components tested and repaired as necessary

Install Notes

    Please follow below for proper installation of module:
  • Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
  • Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
  • Install and connect the replacement module.
  • Connect the negative terminal of the battery.
  • After install clear Diagnostic Trouble Codes and drive vehicle for 1 to 2 days to let your vehicle's monitoring system reset.
  • Clear codes again and no codes should reappear.

Warranty

This module carries a 30 day warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.