01-02 DODGE RAM 1500 2500 3500 ABS ANTILOCK BRAKE CONTROL 52010033 REBUILT OEM
Product Description
Part Number
52010033 - You must match the part number. Will work for all software versions.
- EBCM is free and clear of rust!
Fitment
- You must match your part number for proper fitment. If you do not match this you more than likely will get a no communication situation.
- EBCM may require initialization to your vehicle
- Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes. Please also make sure your abs pump is tested. If the pump or wiring is bad it can the board to pop causing a "pump runner" situation.
Tech Notes
- Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below:
- Solder joints that typically fail have been repaired
- 12+ internal components tested and repaired as necessary
- Relay which typically fails has been replaced
- Drivers and inductors all tested good
Install Notes
- Please follow below for proper installation of module:
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
Optional Core Refund
- If you would like to send your ABS module back to us for a $25 refund, please let us in the "Notes to Seller" box and we will include a prepaid return label with your order. It's that simple! Again, this is optional and you are not obligated to send your ABS module back to us.
- We will not be able to issue a core refund for units that have been completely destroyed by rust.
Warranty
This EBCM carries a 6 month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.