00-02 CADILLAC ESCALADE YUKON ABS ANTI-LOCK BRAKE CONTROL MODULE 13292804H OEM
Product Description
Part Number
- 13292804H - YOU MUST MATCH THIS!
- EBCM is free and clear of rust or corrosion.
- EBCM will require programming to your vehicle.
- These units come out of many different vehicles with many different configurations, some with and some without traction control. Without programming it will not work for your vehicle.
Fitment
EBCM will replace the following part numbers on 2000-2002 Cadillac Escalades and a few other GM trucks and suv's:
13292804H
If you have a differet part number but do not see it above contact us to verify fitment.
- EBCM will require programming to your vehicle. These units come out of many different vehicles with many different configurations, some with and some without traction control. Without programming it will not work for your vehicle.
- Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes.
Tech Notes
Module has been inspected by our experienced technical staff! Techs were able to verify inductors and connector pins have no visible damage, rust or corrosion.
Install Notes
- Please follow below for proper installation of module. If you don't follow these steps you can surge the unit and kill the board. If this happens, we cannot take a return as we repair, power and communicate with all of these units.
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- Have module programmed to your vehicle by your mechanic
Warranty
This EBCM carries a 3 month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.